Laptops have become a necessity for everyone as people spend a lot of time working on laptops, and there is a strong chance that it can overheat, which might damage it. Overheating causes the components to lower their efficiency, which can lead to device failure. So, it’s mandatory to keep your laptop cool, and there are a lot of ways of doing it. This guide will suggest some cool methods that you can do by yourself, so give a thorough read to this guide.
Reasons to keep your laptop cool
Overheating problems occur in all electrical devices, even the heat generated by the devices themselves. Using an electrical device for a longer period can lead it to heat up, which can result in damaging the components of the circuit and affects the performance of the device. The other reasons to keep the laptop cool are as follows:
-
- Excessive heat can kill the laptop
- Overheating makes the laptop slower
- Overheating can damage the laptop components
- Overheating can damage the laptop’s circuit
What are the Easiest DIY Methods to Keep the Laptop Cool?
Creating a cooling system by yourself at home will cost comparatively less than purchasing an entire external cooling system for your laptop. The easiest DIY ways to keep your laptop cool are as follows:
1: Single Fan Cooling System with LED Lights
It’s the easiest build that includes a single cooling fan and a wooden structure that is angled for easy laptop usage. For this, you need to have the know-how of soldering wires and some basic wood-cutting skills, as you have to install a switch in this cooling system along with an LED to operate it. The below-listed items are needed to make this cooling system:
-
- 1x RGB PC cooling fan with USB pin
- Star screwdriver
- Wooden planks
- Soldering iron
- Nails
- Hammer
- Wooden screws
Once you have all the necessary tools and materials, start assembling the frame of the cooling pad using wooden screws or hammering the nails to join the wood pieces. After the frame is created, place the fan in the middle of the frame and dress its wire properly.
2: A Modern Cooling System for Gaming Laptop
This DIY method is more efficient and powerful as it includes 6 fans. You need to attach 6 fans with a glue gun. Some soldering and wiring skills are required as you need to connect the fans and hold them together through plastic pipes. That pipework will hold the fans and act as a frame for placing your laptop. After that, install a switch to power it on. This laptop cooler is the best fit for gamers as it enhances the laptop’s performance at a higher load. The following items are required to make this cooling setup are:
-
- 6 PC cooling fans
- A glue gun
- Plastic pipes
- Switch
- Soldering iron
3: A Professional Homemade Cooling system
This method differs from the other mentioned above as it requires some professional tools and tactics other than the raw material that makes it look professional and results in better cooling. Its frame consists of a metal uni-body along with three cooling fans and a 1mm aluminum sheet that draws the heat away from the laptop. Some professional tools, heat guns, grinders, and soldering skills are required to build an attractive design and efficient cooling. This DIY method is not for beginners.
Materials required to setup this type of cooling system are:
-
- 3 PC cooling fans
- Aluminum sheet
- Heat gun
- Grinder
- Soldering iron
4: A Laptop Cooling Pad That Utilizes All the Fans
In this method, you require 5 fans, and one of them is a PC case fan you have to arrange so that the PC fan is in the center and the 4 fans are glued around it. Now install a USB power supply and a power booster, wire them properly, and turn it on with a switch for use. Use long bolts as legs of this structure and place your laptop on it. This is an ideal DIY cooling method for having a good PC fan collection.
Things that are required to create such type of a setup are:
-
- 5 PC fans
- Glue gun
- USB pin
- Switch
- Long bolts
5. A Plastic Bottle Cooling System for Laptop
If you want to build a modern DIY cooling fan, this is the method for you. It includes packing foam, one fan, a plastic bottle, and an electric motor. Cut the bottle to make fan wings and attach them to the motor, your DIY cooling system is ready to use. Power it on through any power source, and it will result in the cooling of your laptop.
Things required to establish a cooling system like this are listed below:
-
- Packing foam
- 1 PC fan
- Plastic bottle
- Electric motor
- USB pin
Conclusion
Keeping the laptop cool means keeping it safe which results in extending its lifespan. There are numerous ways to keep your laptop clean. You can purchase some external cooling systems that are available in the market. If you are tight on budget, you can create DIY cooling systems at your home with some easy steps. Follow the DIY ways mentioned above to keep your laptop cool.
