CentOS HAProxy Nginx

How to Setup HAProxy as Load Balancer for Nginx in CentOS 8

High Availability Proxy, also abbreviated as HAProxy is a lightweight and fast load balancer which also doubles up as a proxy server. As a load balancer, it plays a crucial role in distributing incoming web traffic across multiple web servers using certain criteria. In doing so, it ensures high availability and fault tolerance in the event there are too many concurrent requests which may overload a single web server.

HaProxy is used by popular sites such as Tumblr, GitHub, and StackOverflow. In this guide, we will take you through the installation of HAProxy in a setup of webservers that are powered using Nginx.

Lab Setup

3 instances of CentOS 7 servers as shown

Hostname           IP addresses

load_balancer      3.17.12.132
server_01          3.19.229.234
server_02          3.17.9.217

Step 1: Edit the /etc/hosts file for the load balancer

To start off, log into the load balancer system and modify the /etc/hosts file to include the hostnames and IP addresses of the two web servers as shown

$ vim /etc/hosts
3.19.229.234   server_01
3.17.9.217     server-02

Once done, save the changes and exit the configuration file.

Now head out to each of the web servers and update the /etc/hosts file with the IP address and hostname of the load balancer

3.17.12.132   load-balancer

Thereafter, confirm  that you can ping the load balancer from server_01

And likewise from server_02

Also, make sure, you can ping the servers from the load balancer.

Perfect ! all servers can communicate with the load balancer!

Step 2: Install and configure HA Proxy on the load balancer

Because HA Proxy is readily available from CentOS official repository, we are going to install it using the yum or dnf package manager.

But as always, update the system first

# yum update

Next, install HA Proxy as shown

# yum install haproxy

Upon successful installation,  navigate to the haproxy directory.

# cd /etc/haproxy

Best practice requires us to back up any configuration file before making any modifications.  So Backup the haproxy.cfg file by renaming it.

# mv haproxy.cfg  haproxy.cfg.bak

Next, proceed and open the configuration file

vim haproxy.cfg

Ensure you make the modification as shown

#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
log         127.0.0.1 local2     #Log configuration
 
chroot      /var/lib/haproxy
pidfile     /var/run/haproxy.pid
maxconn     4000
user        haproxy             #Haproxy running under user and group "haproxy"
group       haproxy
daemon
 
# turn on stats unix socket
stats socket /var/lib/haproxy/stats
 
#---------------------------------------------------------------------
# common defaults that all the 'listen' and 'backend' sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
mode                    http
log                     global
option                  httplog
option                  dontlognull
option http-server-close
option forwardfor       except 127.0.0.0/8
option                  redispatch
retries                 3
timeout http-request    10s
timeout queue           1m
timeout connect         10s
timeout client          1m
timeout server          1m
timeout http-keep-alive 10s
timeout check           10s
maxconn                 3000
 
#---------------------------------------------------------------------
#HAProxy Monitoring Config
#---------------------------------------------------------------------
listen haproxy3-monitoring *:8080                #Haproxy Monitoring run on port 8080
mode http
option forwardfor
option httpclose
stats enable
stats show-legends
stats refresh 5s
stats uri /stats                             #URL for HAProxy monitoring
stats realm Haproxy\ Statistics
stats auth Password123: Password123#User and Password for login to the monitoring dashboard
stats admin if TRUE
default_backend app-main                    #This is optionally for monitoring backend
 
#---------------------------------------------------------------------
# FrontEnd Configuration
#---------------------------------------------------------------------
frontend main
bind *:80
option http-server-close
option forwardfor
default_backend app-main
 
#---------------------------------------------------------------------
# BackEnd round robin as balance algorithm
#---------------------------------------------------------------------
backend app-main

balance roundrobin                         #Balance algorithm

option httpchk HEAD / HTTP/1.1\r\nHost:\ localhost
#Check the server application is up and healty - 200 status code

server server_01 3.19.229.234:80 check               #Nginx1

server server_02 3.17.9.217:80 check                 #Nginx2

Be sure to modify the web servers hostname and IP addresses as indicated in the last two lines. Save the changes and exit.

The next step will be to configure Rsyslog to be able to log HAProxy statistics.

# vim /etc/rsyslog.conf

Make sure you uncomment the lines below to allows UDP connections

$ModLoad imudp
$UDPServerRun 514

Next, proceed and create a new configuration file  haproxy.conf

# vim  /etc/rsyslog.d/haproxy.conf

Paste the following lines, save and exit

local2.=info   /var/log/haproxy-access.log   #For Access Log
local2.notice  /var/log/haproxy-info.log     #For Service Info - Backend, loadbalancer

For the changes to take effect restart the rsyslog daemon as shown:

# systemctl restart rsyslog

Then start and enable HAProxy

# systemctl start rsyslog
# systemctl enable rsyslog

Verify that HAProxy is running

# systemctl status rsyslog

Step 3: Install  and configure Nginx

 Now, the only part remaining is the installation of Nginx. Log into each of the servers and first update the system packages:

# yum update

Next install  EPEL (Extra Packages for Enterprise Linux)

# yum install epel-release

To install Nginx, run the command:

# yum install nginx

Next, start and enable Nginx

# systemctl start nginx
# systemctl enable nginx

We are then going to modify the index.html file in both cases in order to demonstrate or simulate how the load balancer is able to distribute web traffic across both servers.

For server_01

# echo "server_01. Hey ! Welcome to the first web server" > index.html

For server_02

# echo "server_02. Hey ! Welcome to the second web server" > index.html

For the changes to be effected, restart Nginx

# systemctl restart nginx

Step 4: Testing if the load balancer is working

We are finally at the point where we want to see if the configuration is working. So log into the load balancer and execute the curl command repeatedly

# curl 3.17.12.132

You should get alternating output on the terminal showing the value of index.html  from server_01 and server_02

Now let’s test using a web browser. Browse your load balancer’s IP address

http://load-balancer-IP-address

The first page will display content from any of the web servers


Now refresh the webpage and check to see if it displays content from the other web server

Perfect ! The load balance is distributing IP traffic equally between the two web servers !
This wraps up this tutorial on how you can install as well as configure HAProxy on CentOS 8. Your feedback will be much appreciated.

About the author

James Kiarie

James Kiarie

Hey there, this is James Kiarie, a certified Linux administrator with over 4 years of experience in the installation and configuration of Linux servers. Additionally, I have over 2 years in penning down high-quality technical articles in Linux, Windows and tech gadgets. In my free time, catch me listening to music, biking, swimming and playing video games.